List of Publications and PresentationsBooks
| Editors |
Details (Title, etc.) |
| Baaklini G, Meyendorf N, Matikas T, and Gilmore R |
Nondestructive Methods for Materials Characterization", Materials
Research Society, Symposium Proceedings, Vol. 591 |
Meyendorf N and
Rokhlin S |
Activities to publish a book that
summarizes the NDE techniques has been started. The book will be based on the Final MURI
Report |
Reviewed
Articles
Author |
Co-Author |
Details (Title, etc.) |
Balasubramaniam K |
Rao N, Matikas T, and Pagano N |
"Inversion
of composite material elastic constants from ultrasonic bulk wave phase velocity data
using genetic algorithms", Composites. Part B, Engineering, Vol. 29; Issue 2, 1998 |
Blackshire J |
|
"Characterization
of MEMS Transducer Performance using Near-Field Scanning Interferometry", Accepted to
the IEEE/UFFC Journal, November 2001 |
Blodgett M |
Eylon D |
"The influence of texture and phase
distortion on ultrasonic attenuation in Ti-6Al-4V," Journal of NDE, 20(1), March 2001 |
Blodgett M |
Nagy P |
"Anisotropic
Grain Noise in Eddy Current Inspection of Noncubic Polycrystalline Metals", Applied
Physics Letters 72, pp. 1045-1047, 1998 |
Eylon D |
Seagle SR |
"Advances in Titanium
Technology – an Overview", J.JILM, Vol. 50 (2000), 8, pp. 359-370 (published
both in English and in Japanese) |
Frantziskonis
G |
Simon L, Woo
J, and
Matikas T |
"Multiscale
Characterization of Pitting Corrosion and Application to an Aluminum Alloy", European
Journal of Mechanics A - Solids, 19: (2) 309-318 Mar-Apr 2000 |
Frouin J |
Sathish S,
Matikas T,
and Na J |
"Ultrasonic
Linear and Nonlinear Behavior of Fatigued Ti-6Al-4V", Journal of Material Research,
Vol. 14, No. 4, April 1999 |
Hassan W |
Nagy P |
"Experimental
Investigation of the Grain Noise in Interferometric Detection of ultrasonic Waves",
Journal of Nondestructive Evaluation, Vol. 18, No. 4, pp. 139-148, December 1999 |
Hu J |
Nagy P |
"On the Role of Interface
Imperfections in Thermoelectric Nondestructive Materials Characterization", Applied
Physics Letters 73, pp. 467-469, 1998 |
Iroh J |
Wood G, Matikas T, and Pagano N |
"Control of carbon
fiber-polypyrrole interphases by aqueous electrochemical process", Composites. Part
B, Engineering, Vol. 29; Issue 2, 1998 |
Khobaib M |
Rensi A, Matikas T, and Donley M |
"Real
Time Mapping of Corrosion Activity Under Coatings", Progress in Organic Coatings 41
(2001) 266-272 |
Kim J |
Rokhlin S |
"Surface
Acoustic Wave Measurements of Small Fatigue Cracks Initiated from a Surface Cavity,"
Int. J. of Solids Struct., 39/6, 1487-1504, 2002 |
Kim J |
Rokhlin S |
"Ultrasonic
Monitoring of Surface Fatigue Crack Initiation and Growth and Closure", Revised for
publication in International Journal of Fatigue, 2002 |
Luxenburger S |
Arnold W |
"Laser Ultrasonic Absorption
Measurement in Fatigue-damaged Materials", Submitted to Journal Ultrasonics , 2001 |
Martinez M |
Eylon D and Nicholas T |
"Ballistic Impact on Fatigue
Crack Initiation in Ti-6Al-4V Simulated Engine Blades", J. Mat Sci Eng. A, in print |
Matikas T |
Nicolaou P |
"Development
of a Model for the Prediction of the Fretting Fatigue Regimes", Journal of Materials
Research, 2716-2723, 16: (9), 2001 |
Matikas T |
|
"Quantitative Short-pulse
Acoustic Microscopy and Application to Materials Characterization", Microscopy and
Microanalysis –New York, Vol. 6; Part 1, 2000 |
Matikas T |
|
"A high-cycle fatigue apparatus
at 20 kHz for low-cycle fatigue/high-cycle fatigue interaction testing", Fatigue and
Fracture of Engineering Materials and Structures, Vol. 24; Part 10, 2001 |
Matikas T |
|
"Specimen design for fatigue
testing at very high frequencies", Journal of Sound and Vibration, Vol. 247; Part 4,
2001 |
Meyendorf N |
Rösner H, Kramb V, Gloekler J, and
Sathish S |
"Thermo-Acoustic Fatigue
Characterization", Submitted to Journal Ultrasonics, 2001 |
Murray P |
Leedy K,
Schumaker E, Sathish S, Shen L,
and O’Keefe M |
"Generation
and Characterization of Copper Nano-particles", World Scientific, submitted August
2000. |
Nagy P |
|
"Fatigue Damage Assessment by
Nonlinear Ultrasonic Materials Characterization", Ultrasonics 36, pp. 375-381,
1998 |
Nicolaou P |
Shell E and
Matikas T |
"Microstructural
and Surface Characterization of Ti-6Al-4V Alloys After Fretting Fatigue", Materials
Science & Engineering, A269, 98-103, 1999 |
Niinomi M |
Hutson A, Shell E, Eylon D, and Nicholas
T |
"Effect of Cu-Ni Plasma Coating
on Fretting Fatigue Characteristics of Ti-6Al-4V under Flat-on-Flat Contact," ASM STP
1425 Fretting Fatigue Experimental and Analytical Results, ed. by S. E. Kinyon, D. H.
Hoeppner, and Y. Mutoh, in Review (2001) |
Niinomi M |
Akahori T,
Fukunaga K, and Eylon D |
"Fatigue Crack Initiation and
Fatigue Life Prediction of Ti-6Al-4V ELI," Fatigue
Behavior of Titanium Alloys, ed by R.R. Boyer, D. Eylon and G. Lütjering, 1999, pp.
307-314 |
Niinomi M |
Eylon D |
"Fatigue Characteristics of
Biomedical Titanium Alloys," Fatigue Behavior
of Titanium Alloys, ed by R.R. Boyer, D. Eylon and G. Lütjering, 1999, pp. 315-321 |
Pagano N |
Matikas T |
"On the micromechanical failure
modes in a class of ideal brittle matrix composites. Part 2. Uncoated-fiber
composites", Composites. Part B, Engineering, Vol. 29; ISSUE 2; 1998 |
Pagano N |
Matikas T |
"On the micromechanical failure
modes in a class of ideal brittle matrix composites. Part 1. Coated-fiber
composites", Composites. Part B, Engineering, Vol. 29; Issue 2, 1998 |
Potel C |
Chotard T, Debelleval J, Benzeggagh M,
Matikas T, and Pagano N |
"Characterization
of composite materials by ultrasonic methods modelization and application to impact
damage", Composites. Part B, Engineering, 1998; Vol. 29; ISSUE 2, 1998 |
Rokhlin S |
Kim J, Nagy
H, and Zoofan B |
"Effect
of Pitting Corrosion on Fatigue Crack Initiation and Fatigue Life", Engineering
Fracture Mechanics, 62, pp. 425-444, 1999 |
Rokhlin S |
Kim J |
"Ultrasonic
Monitoring of Surface Fatigue Crack Initiation, Growth and Closure", Submitted to the
International Journal of Fatigue (2001) |
Schroeder J |
Eylon D |
"Characterization of Crack
Damage States in Titanium Alloys through Examination of the Surface Deformation Preceding
the Crack Front", Submitted for publication in NDE&T International, 2001 |
Shaw L |
Karpur P and Matikas T |
"Fracture strength and damage
progression of the fiber/matrix interfaces in titanium-based MMCs with different
interfacial layers", Composites. Part B, Engineering, Vol. 29; Issue 3, 1998 |
Walle G |
Karpen W,
Netzelmann U, Rösner H, and Meyendorf N |
"Zerstörungsfreie Prüfung
Mittels Thermographischer Verfahren", tm – Technisches Messen 66, pp 312, 1999f |
Xiao H |
Nagy P |
"Enhanced
Ultrasonic Detection of Fatigue Cracks by Laser-Induced Crack-Closure", Journal of
Applied Physics 83, pp. 7453-7460, 1998 |
Yan Z |
Nagy P |
"Thermo-Optical
Modulation for Improved Ultrasonic Fatigue Crack Detection in Ti-6A1-4V", NDT&E
International 33, 213-223, (2000) |
Zoofan B |
Rokhlin S |
"Microradiographic
detection of corrosion pitting," Mater. Eval. 56(2), pp.191-194 1998 |
Conference
Proceedings
Author |
Co-Author |
Details (Title, etc.) |
Blackshire J |
|
"Detection and Characterization of
MEMS Transducer Defects using Laser Interferometry Techniques", Submitted to the
Ultrasonics Conference, NY City, NY, October 2001 |
Blackshire J |
Duncan B |
"Full-Field Detection of Surface
Defects Using Real-Time Holography and Optical Correlation Techniques", Proceedings
of the SPIE Nondestructive Evaluation Techniques for Aging Infrastructure and
Manufacturing Symposium, Newport Beach, CA, March 3-5, 1999 |
Blackshire J |
Hardie R and
Younus I |
"Advanced
Electronic Phase Stepped Interferometry (EPSI) for Detection and Characterization of Early
Stage Damage in Aerospace Materials", Proceedings of the SPIE Nondestructive
Evaluation Techniques for Aging Infrastructure and Manufacturing Symposium, Newport Beach,
CA, March 3-5, 1999 |
Blackshire J |
Duncan B, Millard M |
"The Use of Real-Time Holography in
SAW Visualization and Surface Defect Detection in Titanium Alloys," 25th Review of
progress in Quantitative NDE (QNDE), Snowbird, Utah, July 1998 |
Blackshire J |
Hardie R, Younus I |
"A Real-Time Phase Unwrapping
Algorithm for EPSI Material Deformation Measurements," 25~ Review of progress in
Quantitative NDE (QNDE), Snowbird, Utah, July, 1998 |
Blackshire J |
Duncan B, Millard M |
"The Use of Real-Time Holography in
SAW Visualization and Surface Defect Detection in Titanium Alloys", Review of
Progress in Quantitative Nondestructive Evaluation, Vol. 18A, pp. 991-998, 1999 |
Blackshire J |
Hardie R, Younus I |
"A Real-Time Phase Unwrapping
Algorithm for EPSI Material Deformation Measurements", Review of Progress in
Quantitative Nondestructive Evaluation, Vol. 18A, pp. 759-764, 1999 |
Blackshire J |
Duncan B, Millard M |
"Visualization of Surface Acoustic
Waves (SAW) using Real-Time Holography," 1998 OSA Annual Meeting, ILS-XIV: 14th
Interdisciplinary Laser Science Conference, Baltimore, Maryland, and October 1998 |
Blodgett M |
Nagy P |
"Eddy current evaluation of
electrical anisotropy in polycrystalline Ti-6A1-4V," Twenty-Fifth Annual Symposium on
Quantitative Nondestructive Evaluation to be held July 19-24, 1998 |
Blodgett M |
Nagy P |
"On the
Role of Grain Noise in Eddy Current Inspection Titanium", Nondestructive Characterization of
Materials in Aging Systems, Vol. 503, pp. 53-62, MRS, Warrendale, 1998 |
Blodgett M |
Nagy P |
"Eddy
Current Evaluation of Electrical Anisotropy in Polycrystalline Ti-6Al-4V", Review of Progress
Quantitative Nondestructive Evaluation, Vol. 18, pp. 1709-1716, Plenum, New York, 1999 |
Buchanan A |
Khobaib, M,
Matikas T, and Donley M |
"Investigation
of Corrosion Initiation Using The Scanning Vibrating Electrode Technique",
Proceedings of the 1999 Tri-Service Conference on Corrosion, November 15-19, 1999, Myrtle
Beach, SC., The U.S. Army Research Laboratory, Aberdeen Proving Ground, MD |
Buchanan A |
Khobaib M,
Matikas T and
Donley M |
"Characterization
of Advanced Coating Systems Used for Corrosion
Protection of Aging Aircraft Structural Components", Proceedings of 1999 Advisory
Group for Aerospace Research and Development, Corfu, Greece, April 1999 |
Criswell T |
Majumdar, B,
Dutton R., and Matikas T |
"The Transverse Interface Strength
of the Fiber-Matrix Interface in Polymer Matrix Composites", Micromechanics and
laminate analysis in honor of Dr Pagano's 65th birthday: Mechanical behavior of advanced
materials - Symposium Conf Date: 1998; Nov Publication: ASME -PUBLICATIONS- MD, Vol. 84,
1998 |
Dai W |
Kim J and
Rokhlin S |
"In-Situ
Surface Acoustic Wave Monitoring of Fatigue Crack Initiation and Propagation", in
Review of Progress in Quantitative Nondestructive Evaluation, Edited by D.O. Thompson and
D.E. Chimenti (Kluwer Academic and Plenum Publisher, New York), Vol. 18, pp. 2225-2233,
1999 |
Depetasse S |
Meyendorf N,
Dlubek G, Krause-Rehberg R, and
Sourkov A |
"Positronenannihilation
als neue Methode zur Charakterisierung unterschiedlich ausgelagerter Aluminumlegierunger
sowie des Verformungs- und Ermudungszustandes von austenitischem Stahl, Berichtsband DACH
– Jahrestagung ’99 Celle, 10-12.5. 1999, DGZfP Berichte Nr. 68.1, S:141-148 |
Dlubek G |
Depetasse S,
Sourkov A, and Meyendorf N |
"Positron
Annihilation Studies of Early Stages of Precipitation in High-Strength Al-Cu-Mg
Alloy", Proc. Euromat ’99, München, 26-30.9.1999 |
Dlubek G |
Depetasse S,
Sourkov A, and Meyendorf N |
"Positron
Annihilation Studies of Early Stages of Precipitation in Strength Aluminum Alloys",
in: "Deformation Induced Microstructures, Analysis and Relation to Properties",
Editors: J.B. Bilde-Sorenson et all, National Lab. Roskilde, Denmark (1999), S. 313-320 |
Dlubek G |
Fretwell H,
Alam M, and Meyendorf N |
"Positron
Annihilation: A New Method for Studying Subnanometer-Size Local Free Volumes in
Polymers", Proc. Euromat ’99, München, 26-30.9.1999 |
Druffner C |
Schumaker E,
Shen L,
Meyendorf N, Sathish S, Raikar G, and
Brar A |
"High Resolution Nondestructive
Material Characterization by Atomic Force Microscopy and Ultrasonic Force Microscopy
(AFM-UFM)", Eighth Annual International
Conference on Composites Engineering (ICCE/8), August 5-11, 2001 Tenerife, Canary
Islands, Spain |
Eylon D |
Seagle S |
"State of
Titanium in the USA – the First 50 Years", a Plenary Paper in the Proceedings of
the 9th Titanium World Conference, St. Petersburg, Russia, June 1999 |
Frantziskonis
G |
Shell
E, Woo J, and Matikas T |
"Wavelet
Analysis of Fretting Experimental Data", SPIE 1999 International Symposium on
Nondestructive Evaluation Techniques for
Aging Materials and Composites, pp. 11-27, G.Y. Baaklini, C.A. Lebowitz, and E.S. Boltz
eds, Newport Beach, CA, 1999 |
Frantziskonis G |
Simon L, Woo J, and Matikas T |
"Characterization of Pitting
Corrosion Damage through Multiscale Analysis", SPIE
Conference on Nondestructive Evaluation of Aging Materials and Composites, Volume 3585,
Paper No. 2, March 3, 1999 |
Frouin J |
Matikas T, Na J, and Sathish S |
"In-Situ Monitoring of Acoustic
Linear and Nonlinear Behavior of Titanium Alloys During Cycling Loading", SPIE
Conference on Nondestructive Evaluation of Aging Materials and Composites, Volume 3585,
Paper No. 14, March 3, 1999 |
Frouin J |
Sathish S, Matikas T, and Na J |
"Nonlinear Acoustic measurements in
Ti-6A1-4V during fatigue", presented at the 25th Review of Progress in
QNDE Snowbird, Utah, July, 1998 |
Frouin J |
Sathish S, Na
J, Maurer J, Eylon D, and Matikas T |
"Real-Time
Monitoring of Acoustic Linear and Nonlinear Behavior of Titanium Alloys During Cyclic
Loading", MRS Symposium Proceedings, November 29-30, 1999, Nondestructive Methods for
Materials Characterization, Vol. 591, pp. 79-86 |
Frouin J |
Sathish S and
Na J |
"Real-Time
Monitoring of Acoustic Linear and Nonlinear Behavior of Titanium Alloys During Low Cycle
Fatigue and High Cycle Fatigue", Proceedings of the SPIE’s 5th International
Symposium on Nondestructive Evaluation and Health Monitoring of Aging Infrastructure, 5-9
March 2000, Newport Beach, CA |
Hoffmann J |
Sathish S and
Meyendorf N |
"Acoustic and Thermographic
Evaluation of Polymeric Corrosion Protective Coatings on Aluminum Alloy Airframe
Structures" SPIE’s 6th Annual Symposium on Nondestructive Evaluation and Health
Monitoring of Aging Infrastructure, Los Angeles, CA, March 2001 |
Hoffmann J |
Sathish S and
Meyendorf N |
"Evaluation of Corrosion on
Aluminum Alloy Airframe Structures under Protective Coatings using Acoustic and
Thermographic Techniques" LiMAT-2001, 2nd International Conference on Light Materials
for Transportation Systems, Pusan, Korea, May 2001 |
Hoffmann J |
Sathish S,
Khobaib M, Meyendorf N, Netzelmann U, and
Matikas T |
"Nondestructive
Characterization of Corrosion Protective Coatings on Aluminum Alloy Substrates", MRS
Symposium Proceedings, November 29-30, 1999, Boston, MA Nondestructive Methods for
Materials Characterization, Vol. 591, pp. 67-72 |
Hoffmann J |
Sathish S and
Khobaib M |
"Nondestructive
Characterization of Corrosion Protective Coatings on Aluminum Alloy Substrates",
Proceedings of the SPIE’s 5th International Symposium on Nondestructive Evaluation
and Health Monitoring of Aging Infrastructure, March 5-9, 2000, Newport Beach, CA |
Hu J |
Nagy P |
"On the thermoelectric effect
of interface imperfections," Twenty-Fifth Annual Symposium on Quantitative
Nondestructive Evaluation to be held July 19-24, 1998 |
Hu J |
Nagy P |
"On the Thermoelectric Effect
of Interface Imperfections", Review of Progress in Quantitative Nondestructive
Evaluation, Vol. 18, pp. 1487-1494, Plenum, New York, 1999 |
Khobaib M |
Hoffmann J,
Sathish S and
Donley M |
"Study of Corrosion Damage
under Protective Coatings", Symposium on NDE Challenges of the 21St Century: Theory
to Practice, New York, NY, November 2001 |
Khobaib M |
Kacmar C,
Matikas T and Donley M |
"Effect of Corrosion Damage on
Fatigue Behavior of Al 2024-T3" Symposium on NDE Challenges of the 21St Century:
Theory to Practice, New York, NY, November 2001 |
Khobaib M |
Rensi A,
Matikas T, and Donley M |
"Real
Time Mapping of Corrosion Activity Under Coatings", Accepted for Publication in
Surface and Coatings Technology, 2000 |
Kim J |
Dai W and
Rokhlin S |
"Ultrasonic
Characterization of Small Fatigue Cracks Initiating From Surface Damage", Presented
at the Conference, Review of Progress in Quantitative Nondestructive Evaluation, Montreal,
Canada, 1999 |
Kramb V |
Shell E, Hoying J,
Simon L, and Meyendorf N |
"Applicability of White Light
Scanning Interferometry for High Resolution characterization of Surface Defects",
Proceedings of SPIE, Newport Beach, CA, March 7-8, 2001, Vol. 4336, pp. 135-145 |
Liu X |
Zhang W and
Frankel G |
"Intergranular Corrosion and Stress
Corrosion Cracking of AA2024-T3," NACE Paper 01233, NACE, Houston, TX, 2001 |
Liu X |
Zhang W and
Frankel G |
"Effect Of Stress on
Penetration of Intergranular Corrosion in Aluminum Alloys; Transition of IGC to
IGSCC," in Chemistry and Electrochemistry of Corrosion and Stress Corrosion Cracking,
R. H. Jones, ed., TMS, p. 543, 2001 |
Martin R |
Sathish S and Matikas T |
"Development of a Scan System for
Rayleigh Wave Velocity Mapping", Review of Progress in Quantitative Nondestructive
Evaluation, Vol. 18/B, 1999 |
Matikas T |
Shell E and
Nicolaou P |
"Characterization of fretting
fatigue damage using nondestructive approaches", SPIE Conference on Nondestructive
Evaluation of Aging Materials and Composites, Volume 3585, Paper No. 1, March 3, 1999 |
Matikas T |
Baaklini G,
Lebowitz C and Boltz E |
"Low-cycle fatigue/high-cycle
fatigue (LCF/HCF) interaction studies using a 10- to 40-kHz HCF loading device", SPIE
Conference on Nondestructive Evaluation of Aging Materials and Composites, Volume 3585,
Paper No. 13, March 3, 1999 |
Matikas T |
Mann L |
"Local Elastic Property Mapping Via
Automation of V(Z) Curve Measurements Using Short-Pulse Acoustic Microscopy", Review
of Progress in Quantitative Nondestructive Evaluation, VOL 18/B, 1999 |
Matikas T |
|
"Analysis of Specimen Geometry and
Low Cycle Fatigue / High Cycle Fatigue (LCF/HCF) Interactive Studies Based on a New 20 kHz
HCF Cell", Proceedings of the 3rd National Turbine Engine High Cycle
Fatigue (HCF) Conference.2-5 February 1998, San Antonio, Texas, pp. 39-46 |
Matikas T |
|
"Development of Enabling
Methodologies for Early Detection of Damage in Aerospace Materials", MRS Fall
Conference, Boston MA, December 1997 |
Matikas T |
Shell E and
Nicolaou P |
"Characterization
of Fretting Fatigue Damage Using Nondestructive Approaches", SPIE 1999 International
Symposium on Nondestructive Evaluation Techniques for
Aging Materials and Composites III, pp. 2-10, G.Y.
Baaklini, C.A. Lebowitz, and E.S. Boltz eds., Newport
Beach, CA, March 1999 |
Maurer J |
Eylon D |
"Characterization
of Fatigue Damage Accumulation", Proceedings of the SAMPE Conference, France, April
1999 |
Maurer J |
Frouin J,
Sathish S,
Matikas T, and
Eylon D |
"Internal Damage
Characterization of Accumulated Fatigue Damage in Ti-6Al-4V Plate material" Titanium'99
Science and Technology, proceedings of the 9th Titanium World Conference,
St. Petersburg, Russia, June 1999. CRISM "Prometey" Publications, Saint
Petersburg, Russia, 2000, pp. 760-767, (ISBN 5-900791-06-8.) |
Maurer J |
Frouin J, Sathish S,
and Eylon D |
"Characterization of
Accumulated Fatigue Damage in Ti-6Al-4V Using Nonlinear Acoustics and TEM", Light
Materials for Transportation Systems, 2001 (LiMAT 2001), ed. by Nack J. Kim, C. S. Lee and
D. Eylon, published by the Center for Advanced Aerospace Materials, Pohang, Korea, (2001),
pp 141-146 |
Meyendorf N |
Fassbender S,
Karpen W, Rösner H,
Sathish S, and Sourkov A |
"NDE of Fatigue in Metals with
Thermography, Acoustic Microscopy and Positron Annihilation Method", In: ICNDT
Conference Proceedings, Roma, 2000 |
Meyendorf N |
Hoffmann J and
Shen L |
"Trends in NDE Using Thermal
Inspection Methods", Proceeding of 2001 ASME International Mechanical Engineering
Congress and Exposition, November 11-16, 2001, New York, NY |
Meyendorf N |
Kramb V |
"Non-Destructive Materials
Characterization Methods for Quality Assurance and Lifetime Prediction, Proceedings of
Swissbonding 15th International Symposium, Zurich, Switzerland, May 15-17, 2001 |
Meyendorf N |
Dlubek G,
Sourkov A, and
Depetasse S |
"Ananlyse
von Ausscheideungsphasen von Alulminiumlegierungen mit Hilfe der Positronenannihilation,
Proceedings of the 15th Russian Scientific and Technical Conference "Nondestructive
Testing and Diagnostics", Moscow 19.6. – 2.7. 1999 |
Meyendorf N |
Altpeter I,
Netzelmann U, Hoffmann J, Nichtl-Pecher W, and Grimm H |
"Microscopic
Techniques for Characterization of Magnetic Layers", MRS Symposium Proceedings,
November 29-30, 1999, Boston, MA, Nondestructive Methods for Materials Characterization,
Vol. 591, pp 145-150 |
Meyendorf N |
Rösner H and
Sathish S |
"Thermographic
Characterization of Fatigue", QNDE Conference, Ames, IA, July 2000, invited
presentation, to be published |
Nagy P |
Hu J |
"Thermoelectric Detection of
Early Fatigue Damage in Metals", Review of Progress in Quantitative Nondestructive
Evaluation, Vol. 17, pp. 1573-1580, Plenum, New York, 1998 |
Nicolaou P |
Matikas T,
Shell E, Baaklini G, Lebowitz C, and Boltz E |
"Modeling fretting fatigue:
interface contact conditions based on profilometry data", SPIE Conference on
Nondestructive Evaluation of Aging Materials and Composites, Volume 3585, Paper No. 3,
March 3, 1999 |
Nicolaou P |
Matikas T and
Shell E |
"Prediction of Fretting Fatigue
Regimes Based on White Light Interference Profilometry Data of the Materials Surface
Conditions", SPIE 1999 International Symposium on Nondestructive Evaluation
Techniques for Aging Materials and Composites, Newport Beach, CA, G.Y. Baaklini, C.A. Lebowitz, and E.S. Boltz eds., pp. 28-39, March
1999 |
Rokhlin S |
Nagy H and
Zoofan B |
"Effect of Corrosion Pitting on
Fatigue Crack Initiation and Fatigue Life," Proceedings of an International Symposium
on Fatigue of materials, The Minerals, Metals, and Materials Society, Warrendale, PA,
Sept. 14-18, 1997 |
Rokhlin S |
Zoofan B,
Kim J.-Y, and Dai W |
"Nondestructive
characterization of pitting corrosion damage and fatigue life", Proceeding of
Airframe/Engine Maintenance and Repair Conference and Exposition, Long Beach, CA, November
1998 (SAE Technical Paper Series 983127) |
Rokhlin S |
Zoofan B and
Kim J |
"Microradiographic
Characterization of Pitting Corrosion Damage and Fatigue Life", in Review of Progress
in Quantitative Nondestructive Evaluation, Edited by D.O. Thompson and D.E. Chimenti
(Kluwer Academic and Plenum Publisher, New York), Vol. 18, pp. 1795-1804, 1999 |
Rokhlin S |
Zoofan B, Kim J and
Dai W |
"Nondestructive
Characterization of Pitting Corrosion Damage and Fatigue Life", Proceedings of SPIE:
Nondestructive Evaluation of Aging Aircraft, Airports and Aerospace Hardware III, Vol.
3586, pp. 66-77, A.K. Mal, ed., Newport Beach, CA, 1999 |
Rokhlin S. |
Zoofan B, and
Kim J.-Y. |
"Microradiographic
Characterization of Pitting Corrosion Damage and Fatigue Life", Review of Progress in
Quantitative NDE, July 19-24, 1998 |
Rokhlin S |
Kim J.-Y |
"In-situ ultrasonic
characterization of fatigue crack initiation and evolution from surface damage: crack
closure effect," Proceeding of 10th International Congress of Fracture, Honolulu, HI,
December, 2001 (Paper # ICF100592OR) |
Rösner H. |
Meyendorf N and Sathish S |
"Nondestructive Characterization of
Fatigue Damage with Thermography", In: "Deutsche Gesellschaft für
Zerstörungsfreie" Prüfung e.V. DGZfP", Berlin: Zerstörungsfreie
Materialprüfung, Berlin: DGZfP, (DGZfP-Berichtsbände), 2002 |
Rösner H. |
Sathish S, and Meyendorf N |
"Nondestructive
Characterization of Fatigue Damage with Thermography", In: Baaklini, G.Y. et al.:
Nondestructive Evaluation of Materials and Composites. In: Conference Proceedings of SPIE
Vol. 4336, New Port Beach, CA, 2001 |
Rösner H |
Sathish S, and Meyendorf N |
"Thermographic Characterization
of Fatigue", In: Review of Progress in Quantitative Nondestructive Evaluation QNDE,
Vol. 20, ed. by D.O. Thompson, D.E. Chimenti, Vol. 20A, pp. 1702, Plenum Press, New York,
2001 |
Rösner H |
Meyendorf N, Sathish S,
Matikas T |
"Nondestructive
Evaluation of Fatigue on Titanium Alloys", MRS Symposium Proceedings, November 29-30,
1999, Boston, MA, Nondestructive Methods for Materials Characterization, Vol. 591, pp.
73-78 |
Rösner H |
Meyendorf N, Sathish S |
"Thermographic
Characterization of the Material Microstructure Using Dissipative Effects", AMA IRS2
2000 Conference, Erfurt, Germany, May 9–11, 2000 |
Sathish S |
Martin R and Matikas T |
"Rayleigh Wave Velocity Mapping
Using Scanning Acoustic Microscope", Review of Progress in Quantitative
Nondestructive Evaluation, Vol. 18/B, 1999 |
Sathish S |
Matikas T,
Martin R, and
Mann L |
"Surface Acoustic Wave Velocity
Imaging Using V(Z) and Time of Flight Measurements", American Society of Mechanical
Engineers: Applied Mechanics Division - Session Conf Date: 1998; Nov Publication: ASME
APPLIED MECHANICS DIVISION -PUBLICATIONS- AMD, VOL 229, 1998 |
Sathish S |
Martin R |
"Development
of a Scan System for Rayleigh, Shear and Longitudinal Wave Velocity Mapping,"
Proceedings of the 1999 IEEE Ultrasonics Symposium, October 17-20, 1999, Tahoe, NV |
Sathish S |
Martin R |
"Scanning
Acoustic Microscopy and X-ray Diffraction Investigation of Near Crack Tip Stresses",
MRS Symposium Proceedings, November 29-30, 1999, Boston, MA, Nondestructive Methods for
Materials Characterization, Vol. 591, pp 55-60 |
Schroeder J |
Shell E,
Matikas T, and Eylon D |
"Development
of Methods to Observe Fatigue Damage through Surface Characteristics", SPIE Conference on Nondestructive
Evaluation of Aging Materials and Composites, Volume 3585, Paper No. 15, March 3, 1999 |
Schroeder J |
Eylon D |
"Prediction
of Oncoming Crack Instability Through a Nondestructive Technique", Proceedings of the
SAMPE 2000 Conference, Long Beach, CA, May 1999 |
Schroeder J |
Shell E,
Matikas T and Eylon D |
"Development
of Nondestructive Methods to Predict Fatigue Crack Instability in Aerospace
Components", Proceedings of the SAMPE International Conference ’99, May 25,
1999, Long Beach, California |
Schroeder J |
Eylon D, Shell
E,
Matikas T |
"Development
of Nondestructive Method for Prediction of Crack Instability", MRS Fall Meeting, Symposium S,
Nondestructive Methods for Materials Characterization, Paper No. S2, November 29, 1999 |
Schroeder J |
Shell E, Matikas T, and Eylon D |
"Development of Methods to Observe
Fatigue Damage through Surface Characteristics", SPIE 1999 International Conference
on Nondestructive Evaluation of Aging Materials and Composites, Volume 3585, Paper No. 15,
Newport Beach, CA, March 3, 1999 |
Schumaker E |
Shen L, Ruddell
M, Sathish S, and
Murray T |
"Ultrasonic
Force Microscopic
Characterization of Nanosized Copper Particles", MRS Fall 1999 Meeting, Symposium F:
Nanophase and Nanocomposite Materials III, Boston, MA, Nov. 29-Dec. 3 |
Shell E |
Eylon D |
"Development
of a New Method for the Detection of Fretting Fatigue Damage", 5th National Turbine Engine High
Cycle Fatigue (HCF) Conference Proceedings, 7-9 March 2000 |
Shell E |
Matikas T and
Nicolaou P |
"Nondestructive
Evaluation of Fretting Damage in Jet Engine Materials", Proceedings of the SAMPE 2000
Conference, Long Beach, CA, May 1999 |
Shell E |
Buchheit R |
"Fatigue Life Prediction of
Corroded Parts using Artificial Neural Network Analysis of NDE Data," Tri-Service
Corrosion Conference, San Antonio, TX, January 2002 |
Shell E |
Eylon D |
"A New Method for Detection and
Quantification of Fretting Fatigue Damage", Light Materials for Transportation
Systems, 2001 (LiMAT 2001), ed. by Nack J. Kim, C. S. Lee and D. Eylon, published by the
Center for Advanced Aerospace Materials, Pohang, Korea, (2001), pp 133-140 |
Simon L |
Khobaib M,
Matikas T, and
Jeffcoate C |
"The Role
of Pitting Corrosion on Fatigue Crack Initiation in Aluminum Alloy 2024-T3",
Proceedings of the TMS’s Symposium on Light Weight Alloys for Aerospace Applications
V, February 28-March 4, 1999 |
Simon L |
Khobaib M,
Matikas T,
Jeffcoate C, and
Donley M |
"Influence
of Pitting Corrosion on Structural Integrity of Aluminum Alloys", SPIE Conference on Nondestructive
Evaluation of Aging Materials and Composites, Volume 3585, Paper No. 4, March 3, 1999 |
Simon L |
Khobaib M and
Matikas T |
"Effect
of Pitting Corrosion to Loss of Structural Integrity in Aluminum Alloys",
Nondestructive Evaluation of Aging Materials and Composites III, Proceedings of SPIE, 3-5
March, 1999, Newport Beach, CA. pp. 40-47 |
Wang L |
Rokhlin S |
"Nanoscale Viscoelastic
Characterization Using Tapping Mode AFM", Review of Progress in Quantitative NDE,
July 19-24, 1998 |
Xiao H |
Nagy P |
"Ultrasonic detection of
fatigue cracks by thermo-optical modulation," Twenty-Fifth Annual Symposium on
Quantitative Nondestructive Evaluation to be held July 19- 24, 1998 |
Yan Z |
Xiao H and Nagy P |
"Ultrasonic Detection of Fatigue
Cracks by Thermo-Optical Modulation", Review
of Progress in Quantitative Nondestructive Evaluation, Vol. 18, pp. 1779-1786, Plenum, New York, 1999 |
Yan Z |
Nagy P |
"Ultrasonic
Detection of Fatigue Cracks by Thermoelastic Modulation", Recent Advances of Ultrasonic NDE,
American Society for Mechanical Engineers, New York 1999, in press |
Yan Z |
Nagy P |
"Improved Ultrasonic
Detection of Fatigue Cracks in Ti-Al-4V by Thermo-Optical
Modulation", Review of Progress in Quantitative Nondestructive Evaluation, Vol. 19,
2000, Plenum Press, New York, in press |
Presentations
at Conferences and Seminars
Author |
Co-Author |
Details (Title, etc.) |
Blackshire J |
Sathish S |
"Characterization
of Micro-Electro-Mechanical (MEMS) Ultrasonic Transducers using Laser
Interferometry", Ultrasonic International, 2001, July 2-5, 2001, Delft, The
Netherlands |
Blackshire J |
|
"Characterization of Bulk
Material States Using Near-Field Scanning Interferometry", Seminar at WPAFB/MLLP
Branch, November 2000 |
Blackshire J |
Sathish S and
Frouin J |
"Characterization
of Bulk Material States Using Near-Field Scanning Interferometry", 25th AIAA
Aerospace Symposium, Dayton, Ohio, March 30, 2000 |
Blackshire J |
Sathish S |
"In-Situ
Monitoring of Fatigue Crack Initiation Using Near-Field Scanning Interferometry",
11th AeroMat Conference, Seattle, WA, June 26-29, 2000 |
Blackshire J |
Duncan B and Millard M |
"A System for Measuring Surface
Defects in Ti-6A1-4V and A12024-T3 Alloys Using Real-Time Holography and Bacteriorhodopsin
Films," 23rd AIAA Mini-Symposium, Dayton, Ohio, April 1998 |
Blackshire J |
Hardie R and
Younus I |
"A Robust and Fast Phase
Unwrapping Algorithm for Speckle Interferometric Material Deformation Measurements,"
23rd AIAA Mini-Symposium, Dayton, Ohio, April, 1998 |
Blackshire J |
Duncan B and
Millard M |
"Visualization
of Surface Acoustic Waves (SAW) Using Real-Time Holography",
1998 OSA Annual Meeting, ILS-XIV: 14th Interdisciplinary Laser Science Conference,
Baltimore, MD, October 1998 |
Blackshire J |
Duncan B |
"Detection of Surface Defects
in Aerospace Materials Using Real-Time Holography and Near-Field Interferometry", 24th
Annual AIAA Dayton-Cincinnati Aerospace Science Symposium, Dayton, OH, April 9, 1999 |
Buchanan A |
Khobaib M and Matikas T |
"Characterization of Coating
Degradation Leading to Corrosion Initiation", 24th Annual AIAA
Dayton-Cincinnati Aerospace Science Symposium, Dayton, OH, April 9, 1998 |
Buchanan A |
Khobaib M and
Matikas T |
"Characterization
of Coating Degradation Leading to Corrosion Initiation", Ohio
Space Grant Consortium 1998-99 Annual Student Research Symposium, Ohio Aerospace
Institute, Cleveland, OH, April 23, 1999 |
Buchanan A |
Khobaib, M. and
Donley, M. |
"SVP
Studies of Coating Defects/Corrosion Initiation", WUD2 Coating and Materials
Processing Peer Review, WPAFB, Dayton, OH, May 3-6, 1999 |
Dai W |
Kim, J.-Y. and Rokhlin, S.I. |
"In-situ
surface acoustic wave monitoring of fatigue crack initiation and propagation,"
presented at The 25th annual Review Of Progress in Quantitative Nondestructive Evaluation,
Snowbird, UT, July 19-24, 1998 |
Druffner C |
Schumaker E,
Shen L,
Meyendorf N, Sathish S, Raikar G, and Brar A |
"High Resolution Nondestructive
Material Characterization by Atomic Force Microscopy and Ultrasonic Force Microscopy
(AFM-UFM)", Eighth Annual International
Conference on Composites Engineering (ICCE/8), August 5-11, 2001 Tenerife, Canary
Islands, Spain |
Druffner C |
|
Society for the Advancement of
Material and Process Engineering (SAMPE), 46th International Symposium and Exhibition,
"High Resolution Imaging of Ceramic Materials by Atomic Force Microscopy and
Ultrasonic Force Microscopy (AFM-UFM)" Long Beach California, May 6-10, 2001 |
Eylon D |
Hutson A,
Niinomi M, and
Shell E |
"Effect of a Cu-Ni Coating on
the Fretting Fatigue Behavior of Ti-6Al-4V",
seminar presented to HCF Group, Materials Directorate, WPAFB, Dayton, OH, December
1998 |
Frankel
G |
|
"Activities in the Fontana
Corrosion Center," Luoyang Ship Materials Research Institute, Qingdao, 8/4/00,
Institute for Corrosion and Protection of Materials, Shenyang, 8/8/00, Corrosion and
Protection Centre, University of Science and Technology Beijing, August 10, 2000 (Invited) |
Frouin J |
Sathish S and Na J |
"Evaluation of Nonlinear and
Linear Acoustic Properties in Fatigue Damaged Ti-6Al-4V Samples", Ultrasonics
International, 2001, July 2-5, 2001, Delft, The Netherlands |
Frouin J |
Maurer J, Sathish S,
Eylon D and Na J |
"Nonlinear Acoustic Parameter
and Microstructure studies in fatigued Ti-6Al-4V, Aeromat 2001, July 11-15,2001, Long
Beach, California |
Frouin J |
Sathish S, Na J and Matikas T |
"Nonlinear acoustics for
quantification of fatigue damage in Ti-6A1-4V", 23rd Annual Mini-Symposium on
Aerospace Science and Technology hosted by AIAA , April 3, 1998, Dayton, OH |
Frouin J |
Sathish S, Na
J,
Maurer J and
Eylon D. |
"Fatigue
Characterization of Titanium Alloys Using Nonlinear Acoustics", 25th AIAA Symposium,
March 30, 2000, Dayton, OH |
Frouin J |
Sathish S,
Na J,
Maurer J, Eylon D, and Matikas T |
"Real-Time
Monitoring of Acoustic Linear and Nonlinear Behavior of Titanium Alloys During Cyclic
Loading", 1999 Materials Research Society Fall Meeting, November 29-December 3, 1999,
Boston, MA |
Frouin J |
Sathish S,
Matikas T, and Na J |
"Real-Time
Monitoring of Material Nonlinearity for Detection of Early Stages of
Fatigue Damage", MURI Annual Review, Hawks Key, Florida, January 1999 |
Frouin J |
Sathish S, Matikas T, and Na J |
"In-Situ Monitoring of Acoustic
Linear and Nonlinear Behavior of Titanium Alloys During Cycling Loading", SPIE 1999
International Symposium on Nondestructive Evaluation Techniques of Aging Materials and
Composites, Newport Beach, CA, March 1999. |
Frouin J |
Sathish S,
Matikas T, and Na J |
"Influence
of Fatigue Damage on the Nonlinear Acoustic Behavior of Titanium Alloys", 24th
Annual AIAA Dayton-Cincinnati Aerospace Science Symposium, Dayton, OH, April 1999 |
Frouin J |
Sathish S,
Matikas T, and Na J |
"Influence
of Fatigue Damage on the Nonlinear Acoustic Behavior of Titanium
Alloys", 10th Annual AeroMat Conference and Exposition, Dayton, OH, June
1999 |
Gloekler J |
|
"Nondestructive Evaluation of
Fatigue Damage Using Thermography", MRS Undergraduate Material Research Initiative
(UMRI) UDR-TR-2001-00030, March, 2001 |
Gustafson S |
Mehta J, Shell E |
"Practical Optical Characterization
of Fretting Damage in Turbine Engine Disks", Second International Symposium on
Fretting Fatigue, Salt Lake City, UT, September 1998 |
Hoffman J |
|
"Nondestructive
Characterization of Corrosion Protective Coatings on Aluminum Alloy Substrates",
Graduate Materials Engineering Seminar, University of Dayton, Dayton, OH, March 31, 1999 |
Hoffman J |
Khobaib M and Matikas T |
"Nondestructive
Characterization of Corrosion Protective Coatings on Aluminum Alloy Substrates", 24th
Annual AIAA Dayton-Cincinnati Aerospace Science Symposium, Dayton, OH, April 9, 1999 |
Hoffmann J |
Sathish S,
Khobaib M,
Meyendorf N, Netzelmann U, and Matikas T |
"Nondestructive
Characterization of Corrosion Protective Coatings on Aluminum Alloy Substrates",
Materials Research Society Fall Meeting 1999, November 29-December 3, 1999, Boston, MA |
Khobaib M |
Mahan A,
Hoffmann J, Meyendorf N, and Donley M |
"Corrosion
Mapping under Protective Coatings", 2001 MRS Spring Meeting, San Francisco, CA, April
2001 |
Kim
J-Y |
Dai W and Rokhlin S |
"Ultrasonic characterization of
small fatigue cracks initiating from surface damage," Presented
at 26th Annual Review of Progress in
Quantitative Nondestructive Evaluation, July 25-30, Montreal,
Canada, 1999 |
Luxenburger S |
Arnold W |
"Laser Ultrasonic Study of
Fatigue Damage", 2nd Workshop of the European Science Foundation network
NATEMIS (Nonlinear Acoustic Techniques for Micro-Scale Damage Diagnostics), March 21-23
2001, Bruges, Belgium |
Luxenburger S |
Arnold W |
"Laser Ultrasonic Absorption
Measurement in Fatigue-damaged Materials", Ultrasonics International 2001, Conference
in Delft, July 1-5th 2001 |
Matikas T |
|
"Enabling NIDE Methodologies
for Characterization of Early Stages of Damage in Aerospace Materials", Coatings
Workshop, Annapolis MD, September 1997 |
Maurer J |
Eylon D |
"Optimization of Smooth High
Cycle Fatigue Strength of Ti-l3Nb-l3Zr Through Microstructural Development." SAMPE
Symposium, 1998 |
Maurer J |
Eylon D |
"Optimization of Smooth High Cycle
Fatigue Strength of Ti-l3Nb-l3Zr Through Microstructural Development." given at the
23rd Annual Mini-Symposium on Aerospace Science and Technology hosted by AIAA on 3 April
98, Dayton OH |
Maurer J |
|
"Characterization of Fatigue
Damage Accumulation", MURI Annual Review, Hawks Key, Florida, January 1999 |
Maurer J |
|
"Characterization
of Fatigue Damage Accumulation", 20th SAMPE Europe International Jubilee Conference, Paris, France,
April 13-15, 1999 |
Maurer J |
|
"Characterization of Fatigue
Damage Accumulation in Ti-6Al-4V Plate Material", 44th SAMPE International
Long Beach Symposium, Long Beach, CA, May 23-27, 1999 |
Maurer J |
Eylon D,
Sathish S, and Frouin J |
"Characterization
of Accumulated Fatigue Damage in Ti-6A1-4V Plate Material Using TEM and Nonlinear
Acoustics", Ohio Space Grant Consortium Research Symposium, Cleveland, OH, April 2000 |
Meyendorf N |
Rösner H and
Banjan P |
"Electric Potential Noise – a
New Way to Characterize Residual Stress", QNDE Conference, Brunswick, ME, July 2001
(Invited) |
Meyendorf N |
Hoffmann J,
Khobaib M,
Shell E, and
Buchheit R |
"Early Detection of Corrosion at
Aircraft Structures", QNDE Conference, Brunswick, ME, July 2001 (Invited) |
Meyendorf N |
Rösner H,
Kramb V,
Gloekler J and
Sathish S |
"Thermo-Acoustic Fatigue
Characterization", Ultrasonic International 2001 Conference in Delft, July 30th 2001
(Invited) |
Meyendorf N |
|
"Recent Work at CMD",
Seminar at the Fraunhofer Institute, IZFP in Saarbrücken, Germany, July 12, 2001 |
Meyendorf N |
Hoffmann J and Altpeter I |
"Characterization of Soft
Magnetic Thin Layers Using Barkhausen Noise Microscopy", 2001 MRS Spring Meeting, San
Francisco, CA, April 2001 |
Meyendorf N |
Altpeter I,
Netzelmann U, Hoffmann J,
Nichtl-Pecher W, and Grimm H |
"Microscopic
Techniques for Characterization of Magnetic Layers", 1999 Materials Research Society
Fall Meeting, November 29 – December 3, Boston, MA |
Murray P |
Leedy K, Schumaker E, Sathish S, Shen,
L, and O’Keefe M |
"Synthesis and Characterization
of Copper Nonparticles", International Symposium on Cluster and Nanostructure
Interfaces, Richmond, VA, Oct. 25-29, 1999 |
Niinomi M |
Hutson A,
Shell E,
Eylon D, and
Nicholas T |
"Effect
of Cu-Ni Plasma Coating on Fretting Fatigue Characteristics of Ti-6Al-4V under
Flat-on-Flat Contact," 3rd International Symposium on Fretting Fatigue, Nagaoka,
Japan, May 2001 |
Rensi A |
Khobaib M,
Matikas T,
Jeffcoate C, and Donley M |
"Characterization of Coating
Degradation Leading to Corrosion Initiation", 23rd Annual Mini-Symposium on Aerospace
Science and Technology hosted by AIAA on 3 April 98, Dayton OH |
Rensi A |
Khobaib M,
Matikas T,
Jeffcoate C, and Donley M |
"Characterization
of Coating Degradation Leading to Corrosion Initiation", Seminar presented to NDE
group, Materials Directorate, WPAFB, June 1998 |
Rokhlin S |
Nagy H and
Zoofan B |
"Effect
of Corrosion Pitting on Fatigue Crack Initiation and Fatigue Life," An International
Symposium on Fatigue of materials, The Minerals, Metals, and Materials Society,
Warrendale, PA, Sept. 14-18, 1997 |
Rokhlin S |
Zoofan B and
Kim J-Y |
"Microradiographic
characterization of pitting corrosion damage and fatigue life," presented at The 25th
annual Review Of Progress in Quantitative Nondestructive Evaluation, Snowbird, UT, July
19-24, 1998 |
Rokhlin S |
Zoofan B, Kim J-Y, and Dai W |
"Nondestructive
characterization of pitting corrosion damage and fatigue life", SAE Airframe/Engine
Maintenance and Repair Conference and Exposition, Long Beach, CA, November 1998 |
Rokhlin S |
Zoofan B, Kim J-Y, and Dai W. |
"Nondestructive
Characterization of Pitting Corrosion Damage and Fatigue Life", Proceedings of SPIE:
Nondestructive Evaluation of Aging Aircraft, Airports and Aerospace Hardware III, Newport
Beach, CA, March, 1999 |
Rokhlin S |
Kim J-Y |
"In-situ ultrasonic
characterization of fatigue crack initiation and evolution from surface damage: crack
closure effect," 10th International Congress of Fracture, Honolulu, HI, December,
2001 |
Rokhlin S |
Kim J and Zoofan B |
"Nondestructive quantification
of localized corrosion and prediction of remaining fatigue life," Tri-Service
Corrosion Conference, January 14-18, 2002 San Antonio, Texas |
Rösner H |
|
"Nondestructive Evaluation of
Fatigue on Titanium Alloys with Thermography", Graduate Materials Engineering
Seminar, University of Dayton, Dayton, OH, March 10, 1999 |
Rösner H |
Meyendorf N, Karpen W, and
Sathish S. |
"Nondestructive
Characterization of Fatigue Damage with Thermography", DGZfP – Jahrestagung
2001, Nondestructive Material Testing, Berlin, Germany, 21-23 Mai, 2001 |
Rösner H |
|
"Nondestructive Evaluation of
Fatigue in Titanium Alloys" Fraunhofer IZFP Seminar, Saarbrücken, Germany, November
13, 2000 |
Rösner H |
|
"Nondestructive Evaluation of
Fatigue in Titanium Alloys" Graduate Materials Engineering Seminar, University of
Dayton, Dayton, Ohio, September 28, 2000 |
Rösner H |
Meyendorf N and Sathish S |
"Nondestructive
Characterization of Fatigue Damage with Thermography", SPIE - 6th Annual
International Symposium on NDE for Health Monitoring and Diagnostics: New Port Beach,
California, USA, March 4-8, 2001 |
Rösner H |
Meyendorf N,
Sathish S, and
Matikas T |
"Nondestructive
Evaluation of Fatigue on Titanium Alloys", Materials Research Society Symposium
Proceedings, Boston, MA, November 29–December 3, 1999 |
Rösner H |
Meyendorf N
and Sathish S |
"Thermographic
Characterization of the Material Microstructure Using Dissipative Effects", AMA IRS2
2000 Conference, Erfurt, Germany, May 9–11, 2000 |
Rösner H |
|
"Nondestructive
Evaluation of Fatigue on Titanium Alloys", Graduate Materials Engineering Seminar,
University of Dayton, Dayton, Ohio, February 10, 1999 |
Rösner H |
Frouin J,
Meyendorf N, and
Sathish S |
"Thermographic
and Nonlinear Acoustic Evaluation of Fatigue in Ti 6Al 4V", ASM 11th Advanced
Aerospace Materials & Processes Conference, AeroMat 2000, Seattle, Washington, June
26-29, 2000 |
Sathish S |
Matikas T |
"Ultrasonic
Force Microscopy: A Novel Nondestructive Capability for Imaging Elastic and Adhesive
Property in Materials at the Nanoscale", 24th Annual AIAA
Dayton-Cincinnati Aerospace Science Symposium, Dayton, OH, April 9, 1999 |
Schroeder J |
Eylon D and
Matikas T |
" Development of Methods to
Observe Material Fatigue Damage Through Surface Characterization ", 23rd Annual
Mini-Symposium on Aerospace Science and Technology hosted by AIAA, April 3, 1998, Dayton
OH |
Schroeder J |
|
" Development of Methods to
Observe Material Fatigue Damage Through Surface Characterization ",
SAMPE, Edward L.
Horne Student Symposium, University of Dayton, February 26, 1998, Dayton OH |
Schroeder J |
|
"Development of Methods to Observe
Material Fatigue Damage Through Surface Characterization ", NASA/Ohio Aerospace
Institute Consortium Student Symposium, NASA Lewis Research Center, Cleveland, Ohio, 1998 |
Schroeder J |
Eylon D,
Shell E, and
Matikas T |
"Development
of Nondestructive Method for Prediction of Crack Instability", Materials Research
Society Fall Meeting, Symposium S, Nondestructive Methods for Materials Characterization,
Paper No. S2.3, November 29, 1999, Newport Beach, CA |
Schroeder J |
Eylon D |
"Basis
for Development of Non-Destructive Evaluation Method to Predict Oncoming Crack
Instability", ASM First Annual Dayton Area Student Symposium of Materials, February
2000 |
Schroeder J |
|
"Method
Using White Light Interference Microscopy to Characterize Surface Deformation Preceding a
Crack", Institute for Nondestructive Testing (IZFP), Saarbrücken, Germany, April 10,
2000, invited presentation |
Schroeder J |
|
"Use of
White Light Interference Microscopy to Predict Failure of Loaded Damaged Titanium
Material", University of Magdeburg, Germany, May 9, 2000, invited presentation |
Schroeder J |
Shell E, Matikas T and Eylon D |
"Development of Nondestructive
Methods to Predict Fatigue Crack Instability", AIChE National Student Poster Session,
Miami, FL, November 16, 1998 |
Schroeder J |
Shell E,
Matikas T and Eylon D |
"Development
of Nondestructive Methods to Predict Fatigue
Crack Instability in Aerospace Components", Edward L. Horne Student Symposium,
Dayton, OH, January 28, 1999 |
Schroeder J |
|
"Prediction
of Fatigue Crack Instability in Aerospace Components through Nondestructive
Evaluation", University of Dayton Engineers in Action Research Poster Presentation,
Dayton, OH, March 20, 1999 |
Schroeder J |
Matikas T |
"A Nondestructive Approach to
Predict Component Failure by Monitoring Material
Surface Characteristics", 24th Annual AIAA Dayton-Cincinnati Aerospace
Science Symposium, Dayton, OH, April 9, 1999. |
Schroeder J |
Shell E, Matikas T, and Eylon D |
"Quantification of Fatigue
Damage through Surface Nondestructive Evaluation",
Ohio Space Grant Consortium Student Symposium, Cleveland, OH, April 23, 1999 |
Schumaker E |
Shen L,
Ruddell M,
Sathish S, and
Murray P |
Poster
Session: "Ultrasonic Force Microscopic Characterization of Nanosized Copper
Particles", Materials Research Society Fall 1999 Meeting, Symposium F: Nanophase and
Nanocomposite Materials III, Boston, MA, November 29 – December 3, 1999 |
Shell E |
Eylon D and
Matikas T |
"Detection of Fatigue Precursor
Damage in Flat Ti-6A1-4V Samples" 23rd Annual Mini-Symposium on Aerospace Science and
Technology hosted by AJAA on 3 April 98, Dayton OH |
Shell E |
Eylon D |
"Development
of a New Method for the Detection of Fretting Fatigue Damage", Dayton Area Student
Symposium on Materials (DASSOM), Dayton Chapter of ASM International, February 9, 2000,
Dayton, Ohio |
Shell E |
Eylon D |
"Detection
of Fretting Fatigue Damage in Ti-6Al-4V by White Light Interference Microscopy",
Seminar presented to Fontana Corrosion Center, OSU, May 12, 2000, Columbus, Ohio |
Shell E |
Eylon D |
"Development
of a New Method for the Detection of Fretting Fatigue Damage", 25th Annual
Dayton-Cincinnati Aerospace Science Symposium, March 2000, Dayton, OH |
Shell E |
Matikas T and
Nicolaou P |
"Nondestructive Evaluation of
Fretting Damage in Jet Engine Materials", 24th Annual AIAA Dayton-Cincinnati
Aerospace Science Symposium, Dayton, OH, April 1999 |
Shen L |
Schumaker E
and Sathish S |
"Difference
in Materials Evaluation Between Tapping Mode Atomic Force Microscopy and Ultrasonic Force
Microscopy", presentation at Twenty-fifty Annual Dayton-Cincinnati Aerospace Science
(AIAA) symposium held on March 30, 2000, in Dayton |
Shen L |
Schumaker E
and Sathish S |
"Evaluation
of Fatigue Damage in Ti-6Al-4V Alloy Employing AFM/LFM/UFM", presentation at 11 th
Annual AeroMat Conference and Exposition held on June 26-29, 2000, in Seattle |
Simon L |
Khobaib M,
Matikas T, and Jeffcoate C |
"The Role of Pitting Corrosion
on Fatigue Crack Initiation in Aluminum Alloy 2024-T3", TMS Symposium on Light Weight
Alloys for Aerospace Applications V, Feb. 28- March 4, 1999 |
Simon L |
Khobaib M and
Matikas T |
"Quantitative Description of
Pitting Corrosion as it Relates to Loss of Structural Integrity of the Material", 24th
Annual AIAA Dayton-Cincinnati Aerospace Science Symposium, Dayton, OH, April 9, 1999 |
Simon L |
Khobaib M and
Matikas T |
"Effect of Pitting Corrosion to
Loss of Structural Integrity in Aluminum Alloys", 10th Annual AeroMat
Conference and Exposition, Dayton, OH, June 21-24, 1999 |
Simon L |
Khobaib M,
Matikas T,
Jeffcoate C, and Donley M |
"Characterization of Coating
Degradation and Initiation of Corrosion Under coating", Seminar presented to NDE
group, Materials Directorate, WPAFB, June, 1998 |
Simon L |
Khobaib M,
Matikas T,
Jeffcoate, C, and Donley M |
"Controlled Pitting in Aluminum
2024-T3 Alloy", Presented at the 23rd Annual Mini-Symposium on Aerospace Science and
Technology hosted by AIAA on 3 April 98, Dayton OH |
Simon L |
Khobaib M,
Matikas T,
Jeffcoate C, and Donley M |
"Pitting Corrosion Damage in
Aluminum 2024-T3 Alloy", Seminar presented to NDE group, Materials Directorate,
WPAFB, June 1998 |
|